01blackformula

iTrader: (18)

About two weeks ago I took my 4L60 out to put a TH-350 in well that didnt work out, so last night I was putting my 4L60 back in got it all together. Then I cranked the car with all the tranny fluid was in. Why would my car not move? It has tranny fluid up to the fill line, and it was in perfect condition before I took it out What could be wrong?

performabuilt

iTrader: (25)

Unhook a cooler line if nothing comes out when you start the car you broke the pump during install some how

01blackformula

iTrader: (18)

Thanks I will check that out. I was thinking that could be the problem, because when we took it out the guy told me to run my car when we had the pan off and all the fluid drained. Could that have burnt up the pump?

FLT

iTrader: (1)

If you were running the motor without any oil in the trans, the pump is probably trashed.

performabuilt

iTrader: (25)

Agreed, The pump cant run long without fluild at all

01blackformula

iTrader: (18)

Thanks alot guys for the info.

trans am1

iTrader: (4)

yep trust them i had the same thing happen