need help with flow rate table
#1
8 SEC SLOPPY SHOT!!!
Thread Starter
iTrader: (15)
Join Date: Oct 2002
Location: lombard,IL
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
need help with flow rate table
Just need some one to do the math for my bigger injectors i have svo 30 psi in there now and my stock were 28 psi i think my car is a 99. i come up with 125.6 witch if i set that number in my flow rate table my ltft go to +20 if i leave it alone my ltft are +8 range . i run 58 psi of pressure. so my injector are really 36 psi right.it just seems like the table is backwards.if i set my FR to 80% my ltft would be close and i could fine tune with the MAF.this math stuff is starting to get to me