82-92 Camaro Z28 Parts
10-04-2007, 09:21 AM
#1
Registered User
Thread Starter
Join Date: May 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
82-92 Camaro Z28 Parts All parts came off of a third generation 1982 Camaro Z28, but most parts will fit 1982 - 1992. Some parts may also fit Pontiac Firebird & Trans am.
Located in Mich. Pick up for free, or will ship (shipping NOT included in prices below).
mirror t-tops with leather bag & t-top locks $100
rear spoiler off 1992 $200
drivers side door (PW, PL) $75
headlight covers (SMOKE, GT01045S) $15
tail light covers, new in box never used, (smoke GTS #GT030) $50
Door sill plate (painted black, drivers side) $10
Fenders (both, see pic, with Buick GNX vents, SOLD AS A PAIR ONLY! Nice!) $175.
FRONT NOSE PIECE WITH WRAPAROUND LOWER SPOILER / AIR DAM (HEADLIGHTS, BEZELS, ETC., INCLUDED, NO GRILL MESH & NO PARKING LIGHTS) Aftermarket 85-92 style $200
hatch $50
hatch weatherstripping (attaches to body) $10
RCI plastic racing seats with vinyl seat covers, pair, $100
TCI SUPER STREET FIGHTER 400 TRANS WITH FULL MANUAL REVERSE VALVE BODY, TRANSBRAKE & DEEP FINNED ALUMINUM PAN (EXTRA FLUID CAPACITY), TCI SUPER STREET TORQUE CONVERTER (3500+ STALL) (STALLED FOR ME @ 4000), AN AWESOME TRANS! $1200. (will separate trans / converter if you only want 1).
16 GALLON PLASTIC FUEL CELL, WITH FUEL LEVEL SENDING UNIT, VENTED, ; ALUMINUM SEALED CASE FOR FUEL CELL (NHRA LEGAL FOR INTERIOR USE) $125
hamburger HP ultra lite hitachi hi torque mini starter $75
400 4 bolt block + eagle steel crank (3.75 STROKE, STOCK JOURNALS) + eagle H beam rods (5.7 LONG, 2.100 FLOATING PINS) + Manley 12.5 to 1 forged pistons (+.030), assembled, good rings & bearings, ARP studs & bolts. $900
Phantom I gauges:
oil temp (2 5/8", elec) $40
trans temp (2 5/8, elec) $30
volts (2 5/8) $30
oil pressure (3 3/8", mech) $40
water temp (3 3/8, mech) $60
tilt steering column (no steering wheel) $75
center console (PW & Hatch switches, nice door cover) $50
CONVO PRO RIMS 15X7 FRONT (3 3/8 backspace) WITH MT SPORTSMAN 26 X 7.5 TIRES; REAR 15X8 WITH MICKEY THOMPSON SPORTSMAN PRO 10.5 X 28 TIRES TUBED & SCREWED, 3 3/8” BACKSPACE, BOWTIE VALVE STEM CAPS, METAL CENTER CAPS, $800.
HOOKER SUPERCOMP HEADERS (FULL LENGTH, 1 3/4” PRIM, 3” OUT) WITH TRI-Y COLLECTOR PIPE (4 INTO 2 INTO 1, HELPS BOTTOM END TORQUE WITHOUT LOSING TOP END HP) + DUAL CHROME MR GASKET VALVE COVER BREATHERS WITH EXHAUST HOOKUP HOSE (ENGINE EVACUATION SYSTEM, WELDED INTO COLLECTOR) THESE WERE ORIGINALLY CERAMIC COATED, BUT SOME OF THE COATING HAS BURNED OFF ON THE TOP SIDE (BY THE HEADS) $400
Stainless steel 3" dual exhaust with Dynomax Race Magnum mufflers (2 chamber, dumps before rear end, exhaust tips) $75
SEE details & pics + MORE PARTS at:
http://www.lookwhatigotonline.com/camarospecial.html
ONLY the parts listed on that page are still available!
Car is gone, need to sell the rest of these parts NOW!
If interested > EMAIL ME < at:
z-28forsale@hotmail.com
Thanks.
Located in Mich. Pick up for free, or will ship (shipping NOT included in prices below).
mirror t-tops with leather bag & t-top locks $100
rear spoiler off 1992 $200
drivers side door (PW, PL) $75
headlight covers (SMOKE, GT01045S) $15
tail light covers, new in box never used, (smoke GTS #GT030) $50
Door sill plate (painted black, drivers side) $10
Fenders (both, see pic, with Buick GNX vents, SOLD AS A PAIR ONLY! Nice!) $175.
FRONT NOSE PIECE WITH WRAPAROUND LOWER SPOILER / AIR DAM (HEADLIGHTS, BEZELS, ETC., INCLUDED, NO GRILL MESH & NO PARKING LIGHTS) Aftermarket 85-92 style $200
hatch $50
hatch weatherstripping (attaches to body) $10
RCI plastic racing seats with vinyl seat covers, pair, $100
TCI SUPER STREET FIGHTER 400 TRANS WITH FULL MANUAL REVERSE VALVE BODY, TRANSBRAKE & DEEP FINNED ALUMINUM PAN (EXTRA FLUID CAPACITY), TCI SUPER STREET TORQUE CONVERTER (3500+ STALL) (STALLED FOR ME @ 4000), AN AWESOME TRANS! $1200. (will separate trans / converter if you only want 1).
16 GALLON PLASTIC FUEL CELL, WITH FUEL LEVEL SENDING UNIT, VENTED, ; ALUMINUM SEALED CASE FOR FUEL CELL (NHRA LEGAL FOR INTERIOR USE) $125
hamburger HP ultra lite hitachi hi torque mini starter $75
400 4 bolt block + eagle steel crank (3.75 STROKE, STOCK JOURNALS) + eagle H beam rods (5.7 LONG, 2.100 FLOATING PINS) + Manley 12.5 to 1 forged pistons (+.030), assembled, good rings & bearings, ARP studs & bolts. $900
Phantom I gauges:
oil temp (2 5/8", elec) $40
trans temp (2 5/8, elec) $30
volts (2 5/8) $30
oil pressure (3 3/8", mech) $40
water temp (3 3/8, mech) $60
tilt steering column (no steering wheel) $75
center console (PW & Hatch switches, nice door cover) $50
CONVO PRO RIMS 15X7 FRONT (3 3/8 backspace) WITH MT SPORTSMAN 26 X 7.5 TIRES; REAR 15X8 WITH MICKEY THOMPSON SPORTSMAN PRO 10.5 X 28 TIRES TUBED & SCREWED, 3 3/8” BACKSPACE, BOWTIE VALVE STEM CAPS, METAL CENTER CAPS, $800.
HOOKER SUPERCOMP HEADERS (FULL LENGTH, 1 3/4” PRIM, 3” OUT) WITH TRI-Y COLLECTOR PIPE (4 INTO 2 INTO 1, HELPS BOTTOM END TORQUE WITHOUT LOSING TOP END HP) + DUAL CHROME MR GASKET VALVE COVER BREATHERS WITH EXHAUST HOOKUP HOSE (ENGINE EVACUATION SYSTEM, WELDED INTO COLLECTOR) THESE WERE ORIGINALLY CERAMIC COATED, BUT SOME OF THE COATING HAS BURNED OFF ON THE TOP SIDE (BY THE HEADS) $400
Stainless steel 3" dual exhaust with Dynomax Race Magnum mufflers (2 chamber, dumps before rear end, exhaust tips) $75
SEE details & pics + MORE PARTS at:
http://www.lookwhatigotonline.com/camarospecial.html
ONLY the parts listed on that page are still available!
Car is gone, need to sell the rest of these parts NOW!
If interested > EMAIL ME < at:
z-28forsale@hotmail.com
Thanks.
