05 Console Door Lock Switch
10-06-2007, 02:38 PM
#1
Teching In
Thread Starter
Join Date: Nov 2005
Location: Alabama
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
05 Console Door Lock Switch Hi,
Does anyone have the BCM wiring for the center console door lock switch?
I have searched all the forums (LS1GTO, GTOforums, etc), and there is a lot of info, with most of it contradictory. I've had the switch for quite a while, and am just getting around to installing it.
The newest forum post show the switch using only 2 wires to the BCM, while the write-ups show using:
C4-16 Lock
C4-20 Unlock
C1-11 Ground
It seem some people have trouble with this setup.
Has anyone installed the switch, and have the wiring to the BCM?
I have a M6 manual trans.
Thanks,
Larry
Does anyone have the BCM wiring for the center console door lock switch?
I have searched all the forums (LS1GTO, GTOforums, etc), and there is a lot of info, with most of it contradictory. I've had the switch for quite a while, and am just getting around to installing it.
The newest forum post show the switch using only 2 wires to the BCM, while the write-ups show using:
C4-16 Lock
C4-20 Unlock
C1-11 Ground
It seem some people have trouble with this setup.
Has anyone installed the switch, and have the wiring to the BCM?
I have a M6 manual trans.
Thanks,
Larry
10-08-2007, 02:03 PM
#4
TECH Regular
iTrader: (1)
Join Date: Mar 2004
Location: Minnesota
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
I think the wiring diagram may be at the JHP site. I bought the kit from them.
Frankly, that was the most worthless mod I have done. I have not used it since I tested it.
Pat
Frankly, that was the most worthless mod I have done. I have not used it since I tested it.
Pat
