Corvette Torque Tube
10-22-2007, 05:38 PM
#1
Teching In
Thread Starter
Join Date: Oct 2007
Location: Batavia IL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Corvette Torque Tube I have a 2003 Corvette Z06 that I bought as a totaled auto. I bought the running gear, brakes, LS6, six speed trans (manual), wheels, brakes, control arms, front and rear suspension, and rear end.
I am building a frame for this in order to mount a 67 Chevelle convertable to this. The wheel base on the Chevelle is about 24" longer than the Corvette, so I will need to lengthen the torque tube in order to make this work.
I am looking for information on how to do this. Has any one had any work done on a torque tube? I know that they shorten them when they mount C1 or C2 bodies to C5 suspension, I just can't find any info on how they, or who is doing it.
Any help would be appreciated.
Thanks, Jim.
I am building a frame for this in order to mount a 67 Chevelle convertable to this. The wheel base on the Chevelle is about 24" longer than the Corvette, so I will need to lengthen the torque tube in order to make this work.
I am looking for information on how to do this. Has any one had any work done on a torque tube? I know that they shorten them when they mount C1 or C2 bodies to C5 suspension, I just can't find any info on how they, or who is doing it.
Any help would be appreciated.
Thanks, Jim.
