johnster

iTrader: (27)

hey guys, i am about 2 tear into my car 2morrow,is there any helpful tip yall can give me on this cam swap? what bit shold i use on the tb hole to make it alittle big? or should i leave it alone thanks

allthrotle

iTrader: (2)

I left mine alone, took it out of the box and slapped it on.

johnster

iTrader: (27)

anybody eles

brad8266

iTrader: (23)

Shouldnt need to do any drilling. Open the airway via tuning if you need to.

2000Hawk

iTrader: (5)

Yeah just leave it alone, and just get a tune right away and everything will be great. Just follow the cam swap on LS1HowTo.com and you'll do everything just fine. Be patient when swapping out from one cam to another to make sure you don't hit the cam bearings.
-Joel

johnster

iTrader: (27)

thanks guys i have the f 11 cam in there now and tha car was tured my rpm. it idles great rite now!!!!

cabel1

iTrader: (3)

Let me know how it runs. I have the TRex with stock 98 intake and throttle body and was thinking of the fast 90/90