drag radial guys please advise...
12-21-2007, 11:47 PM
#1
11 Second Club
Thread Starter
iTrader: (37)
Join Date: Jan 2007
Location: northwest La
Posts: 1,383
Likes: 0
Received 0 Likes
on
0 Posts
drag radial guys please advise... Just wondering what rpm to shoot for now that i have some dr's on. Used to, anything above 1500 rpm would just blow the tires off. My times are good, but my 60's are horrible. I have a good clutch and a good rear. What rpm should i be shooting for after a good burnout? And what psi?
Last time out i ran a 13.09 on street tires and with a 2.1 60ft. I really want that 12 sec pass
Last time out i ran a 13.09 on street tires and with a 2.1 60ft. I really want that 12 sec pass
12-22-2007, 11:33 PM
#4
11 Second Club
iTrader: (16)
Join Date: Jan 2005
Location: Southern Oklahoma
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
well, no matter what with Dr's you'll get your 12 second pass. Just try in 500rpm increments. start off at 1500. I think you'll get to a 3000 rpm launch before you actually start to spin worse than your street tires.