LS1Silverado05

iTrader: (41)

Well, I am doing an M6 swap into my car. As seen in my sig, my cam is a 231/237 592/603 111.5 ...will I still have a good power curve, or will I need to step it down? I know this cam i sfar from "BIG", but as far as power under curve, will it still be a runner? The 3.23s will be going by the way....probably 4.10s for the M6?...

5.3LJimmy

iTrader: (10)

That cam will be fine, especially if you go with the 4.10's.

99mongooSS

iTrader: (4)

yeah you can have bigger cams on the street with six speeds than auto so that cam is fine.

LS1Silverado05

iTrader: (41)

Off topic, but what do the M6s run with 4.10s on the highway at say 70MPH? Alot better than an A4 I guess?..

aDaM Ws6

iTrader: (3)

runs good 2k rpm in 6th gear

BES Stroked Nova

iTrader: (24)

at 70. i am at about 1900 to 2000rpm's in 6th