Sluggish after H/C????
#1
TECH Apprentice
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Sluggish after H/C????
Well I recently put in a 228/234 .607/.598 110 cam. I took out the F1 (230/226 .591/.569 112) Now the car has no low end and will not spin the tires. I'm also getting Codes p0134 and p0412? It's still running on the F1 cam tune. The car will bog from a take off and then finallly accelerate. I have checked all the wires and plugs and they are fine. I'm also getting a lot of mis fires on cyl 5 and 8. No timing is being pulled or any knock is being decteed. Any ideas why it is doing this? I drove it for about 50 miles to let the computer relarn and it still does it. I had no problem before with the f1 taking from a stop. I ran 7.70's before i swiched cams now i'm back to 8.5's in the 1/8th. Any advice will be appreciated.
Joe
Joe