blown402

Does anybody make a larger diameter 6 rib crank pulley? For a procharger set up?

kp

iTrader: (34)

there was the old MMS pulleys, they were like 7.8" diameter or something. They havent been made in years but one still pops up occasionally for sale, they do work but anything over a P1SC really needs an 8 rib setup on an F-body.

Blackbird

MMS pulley does work pretty well if your on a budget.

My buddy has one on his D1'd TA and it's doing really well pumping out 13psi and 650rwhp.

Both he and I were suprised how well it's done over the years.

So if your really budget minded, and can find one it's not a bad way to go.

WHPLASH

iTrader: (22)

I have a MMS too. And pushing around 12 psi. Not much room for increasing. Belt slip central here.