PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Need LS1 EDIT file from similar car.

Thread Tools
 
Search this Thread
 
Old 07-14-2003, 01:24 AM
  #1  
TECH Resident
Thread Starter
iTrader: (1)
 
Bowtieman4life's Avatar
 
Join Date: Apr 2003
Location: Austin, Tx
Posts: 860
Likes: 0
Received 0 Likes on 0 Posts

Default Need LS1 EDIT file from similar car.

I need a starting point to tune my car. These are the following mods:

1. LS6 inatke
2. Magnaflow catback
3. Jet Hot LT heats and Hooker Off road Y
4. Comp custom cam .581/.563 220/220 112 LSA XE-R int XE exh
5. ASP Pulley
6. Yella Terra 1.7 rockers
7. O2 simms in rear
8. Spec stg 3 clutch

I know you don't need all this info but I just wanted to share it since I recently installed it.
Old 07-17-2003, 04:01 PM
  #2  
Cal
TECH Veteran
iTrader: (1)
 
Cal's Avatar
 
Join Date: Feb 2003
Location: Northern Utah
Posts: 4,692
Likes: 0
Received 3 Likes on 3 Posts

Default Re: Need LS1 EDIT file from similar car.

Drill the TB one or two drill sizes, raise the idle to 850rpm, the rev limit to 6600rpm, scale the VE 1200rpm and below by 80%, and lower the fan temps some. That should be a good starting point.




All times are GMT -5. The time now is 03:30 PM.