SBC, 4.6 Ford stuff *FREE*
#1
Launching!
Thread Starter
Join Date: Nov 2003
Location: Katy, TX
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
SBC, 4.6 Ford stuff *FREE*
I have 3 SBC blocks.
(1) 4 bolt main, 2 pc. rear.
(1) 2 bolt main, 2 pc. rear.
(1) 2 bolt main, 1 pc. rear.
All blocks are at .040 and need to go to .060. They also need to be baked and blasted.
And 1 4.6 block
(1) Ford 4.6 iron block (Windsor/non Romeo)
Needs to be baked and blasted. Unsure of the bore but if anyone is interested I can stick a caliper to it.
I also have 2 SBC cranks, both need to be turned .060 undersize and/or possibly welded. XXX442 castings. They are 2 pc. cranks. I can refer you to a bangin-*** crank grinder in Tulsa if you're that interested.
All this **** is FREE, come and get it. Just PM me if you're interested and I'll make sure I get all the caps and stuff together. I also have a big-assed roller cabinet that if anyone is interested, they can have that too. I'm moving back to Arkansas soon and don't have time to machine all this stuff.
I might have pics of the roller cab, but won't take any of the blocks. Like I said before, they need to be baked, blasted, and machined.
(1) 4 bolt main, 2 pc. rear.
(1) 2 bolt main, 2 pc. rear.
(1) 2 bolt main, 1 pc. rear.
All blocks are at .040 and need to go to .060. They also need to be baked and blasted.
And 1 4.6 block
(1) Ford 4.6 iron block (Windsor/non Romeo)
Needs to be baked and blasted. Unsure of the bore but if anyone is interested I can stick a caliper to it.
I also have 2 SBC cranks, both need to be turned .060 undersize and/or possibly welded. XXX442 castings. They are 2 pc. cranks. I can refer you to a bangin-*** crank grinder in Tulsa if you're that interested.
All this **** is FREE, come and get it. Just PM me if you're interested and I'll make sure I get all the caps and stuff together. I also have a big-assed roller cabinet that if anyone is interested, they can have that too. I'm moving back to Arkansas soon and don't have time to machine all this stuff.
I might have pics of the roller cab, but won't take any of the blocks. Like I said before, they need to be baked, blasted, and machined.
#5
Launching!
Thread Starter
Join Date: Nov 2003
Location: Katy, TX
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
The 4 bolt main looks like a 4 bolt main. It's got surface rust but in otherwise good shape.
I looked around but couldn't find any pics of the roller cab. I don't have a working camera at this moment or I'd just zip on out there and grab some photos. I'll see what I can do tomorrow morning.
I looked around but couldn't find any pics of the roller cab. I don't have a working camera at this moment or I'd just zip on out there and grab some photos. I'll see what I can do tomorrow morning.