98 4mula

iTrader: (7)

I have a lid, muffler and the airbox cutout on 245-50 bridgestones.... ohh this was my first time at the track with the car. 1st run spun hard, 2nd bogged and missed 4th and 3-5 were pretty good with minimal spinning on the latter 2runs.

60 ft.... 2.756 2.433 2.076 2.150 2.161
1/4...... 14.582 14.457 13.605 13.554 13.544
mph..... 103.11 82.490 103.69 105.16 105.32

What would it take to get into the 12's?

I was wondering if some nitto DR, pulley ported TB, polished MAF ends and some of the free mods would do it.

My 04 Goat

Drag radials with a better sixty foot .. Say a 1.8X should work.. And shift like mad LOL

Nittos are a great all around tire that works on and off the track.. If your going for all out performace and not going to run track tires on the street go with a more race oriented tire

02 BLK WS6

iTrader: (11)

A better driver and sticky tires.

Villain281H

iTrader: (5)

a low 1.8 60 foot would be needed to crack the twelves based on your mph and 60 foots posted. A few more mods and a tune would help out, but you did fine for a first timer.

5_02ls1

iTrader: (20)

seat time....do all your bolt ons and some traction and 12s will be easy

BayAreaSS

iTrader: (10)

I went for my first time and my slips looked like yours. I had 60fts that were very bad but the more i ran the more confidence i built. It takes a lot of passes to get the launch down. I still suck at it. Pretty good times though

Maybe i'll see you at the track one day