viperkiller04

i just put 18*9.5 z06 wheels on my 2000 camaro and i think they sit in to far. i have been trying to find some info on wheel spacers and i cant find to much. i havent seen any pics so i am interested if anyone is using them and if they are what size. i was thinking about running 1 to 1.5 inch in the back and 1 inch in the front

thanks for any info anyone can help me with

Badass02WS6

mine are 1 1/4 wheel adapters got from a friend off of ebay . can pm the guys phone nom. if you like . don't know his name.he makes all kinds . payed $60 shipped for mine

carado1984

ok youre talking about adaptors.. spacers are generally less than a 1/4 of an inch and are basically a piece of aluminum with some holes in it that slide on.

getusumws6

iTrader: (9)

I use 3/8 billet spacers w/ my draglites, if you buy cast alum. ones(mr.gasket) they have tendancy to crack. spend money on the billet ones if you need spacers they are about $60 bux a pair.

michaelg589

iTrader: (1)

I have 5/16" aluminum spacers and 2.5" ARP studs. no problems. no pics either though. sorry

sixvi6-camaro

iTrader: (9)

dont know what kind of pics you are looking for but.. here are some ebay 1" adapter/spacers that I used to run before I had to put on the long studs for the drag rims..



And some SouthWest speed 5/8 spacers I use on the front with my skinnies with ARP studs on the car..




And this is how the stock 16's look with 1" spacers on the rear.




Hope this helps..