How do I use a quick disconnect fuel line tool??
#1
Teching In
Thread Starter
Join Date: Feb 2008
Location: Allenton, MI
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
How do I use a quick disconnect fuel line tool??
I'm swapping out the intake right now for an LS6 intake and I've got pretty much everything off except for the fuel line right before the fuel rail. I have the 3/8" tool to get it off, and I put it in there and tried pulling it off but it's not working. It's just stuck on. Any tips, advice, etc??
#5
TECH Addict
iTrader: (6)
hmmm, are you sure you need to disconnect anything to make the intake swap? keep your original fuel rail and swap the intake right under it! you really might check this site:www.ls1howto.com explains everything with high res pics
#6
Launching!
iTrader: (2)
Join Date: Nov 2004
Location: Humble, Texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
hmmm, are you sure you need to disconnect anything to make the intake swap? keep your original fuel rail and swap the intake right under it! you really might check this site:www.ls1howto.com explains everything with high res pics