Standard LS1 t56 trans with CTS-V clutch?
03-05-2008, 12:21 PM
#1
On The Tree
Thread Starter
iTrader: (14)
Join Date: Jan 2008
Location: Baltimore, MD
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Standard LS1 t56 trans with CTS-V clutch? I'm close to picking up a low mileage LS6 from a CTS-V and was wondering if the standard T56 will bolt right up? I've read something about a flywheel difference and a required spacer but I think that is if you yous a CTS-V T56 with a standards LS1. That was after sifting through the search results.
Trying to save some money here so I'd prefer not to spend on a new clutch setup too if I can get one with the motor. Power will remain stock.
Lemme know.
Thanks,
Frank
Trying to save some money here so I'd prefer not to spend on a new clutch setup too if I can get one with the motor. Power will remain stock.
Lemme know.
Thanks,
Frank
03-05-2008, 08:23 PM
#2
CTSVs have dual mass flywheels. You need to change the flywheel and clutch to an f-body/vette style or you'll have to run the clutch and transmission from a CTSV to accommodate the extra thick flywheel. You can get the LS6 Z06 clutch/flywheel for a decent price.
