Shaved 317's on stock LQ9
03-11-2008, 08:41 AM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Location: Dartmouth, Nova Scotia, Canada
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Shaved 317's on stock LQ9 Wondering if anyone has experience with shaving a set of 317's to 64-65cc chambers, .040 gasket
Stock flatop LQ9 pistons, and want to run the F13 cam 595"/585" lift
This a possible combination or is PTV going to be an issue..hopefully someone has gone this route before
Thanks
Stock flatop LQ9 pistons, and want to run the F13 cam 595"/585" lift
This a possible combination or is PTV going to be an issue..hopefully someone has gone this route before
Thanks
03-11-2008, 09:53 AM
#2
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Location: Dartmouth, Nova Scotia, Canada
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
after some more searching, some answers were found with a past thread..sorry for this wasted thread 
https://ls1tech.com/forums/dynamometer-results-comparisons/831652-budget-lq9-dyno-results.html
https://ls1tech.com/forums/dynamometer-results-comparisons/831652-budget-lq9-dyno-results.html
