Help on wiring a Digital MSD w/ HSW Interface
#1
TECH Apprentice
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: Phoenix
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Help on wiring a Digital MSD w/ HSW Interface
I need a wire diagram on how to wire my Interface(dry shot) and my MSD window switch with the relay and WOT switch... i had it and work without the msd, but now im adding the msd and i cant fiagure it out. i try the wire diagram from HSW and its not activating on the nitrous or the interface...its driving me crazy!!! please help
#2
FormerVendor
iTrader: (14)
Join Date: Jun 2005
Location: Glenolden, PA
Posts: 2,056
Likes: 0
Received 0 Likes
on
0 Posts
Yellow wire on the MSD should go to the Blue wire on the Interface. The Brown wire on the Interface will be hooked up to pin # 85 on the N2O relay (there is a diagram at the end of the Interface Install manual). On the Interface Trigger +/- will be set to "-" and Trigger Power will need to be set to "on". If your MSD window switch is not activating the Interface won't be triggered.
Matt
Matt
I need a wire diagram on how to wire my Interface(dry shot) and my MSD window switch with the relay and WOT switch... i had it and work without the msd, but now im adding the msd and i cant fiagure it out. i try the wire diagram from HSW and its not activating on the nitrous or the interface...its driving me crazy!!! please help
#3
TECH Apprentice
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: Phoenix
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
but the interface wiring doesnt have a diagram on how to hook the WOT switch..
hads anyone wired a msd to the interface? i know of a guy that did but i cant find him.
Its a z28 from Az with the same kit, just it was a wet kit..
hads anyone wired a msd to the interface? i know of a guy that did but i cant find him.
Its a z28 from Az with the same kit, just it was a wet kit..