Lots of race sbc parts really cheap!!
04-25-2008, 01:22 AM
#1
Banned
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: Okinawa, Japan/Fort Worth, TX
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Lots of race sbc parts really cheap!! Hey guys Im selling off all of my sbc stuff, Im on leave until the 6th so I would like to have it all gone by then and thats why its all so cheap. Heres the list:
1 set of eagle esp forged h-beam rods, 6.25 inch
$150
1 set of fully balanced TRW forged pistons, part # L2252af-30-
$150 for set.
1 solid roller custom grind, never ran. It is a Crane #118151 260/270@.050, 300/310advertised, 108LSA, .625" lift before lash with 1.5 rockers.
$100
1 Spec stage 3 clutch disc in perfect shape w/about 1k miles on it
$40 shipped
1 set of Canfield aluminum heads http://www.canfieldheads.com/sbc_2600.html
These heads are $1000 new bare but I will take $400 for them because they had a hairline crack at the base of rocker mount from overtightening of the stud and the crack was filled but the extra material was never shaved off, it would cost about $200 to have them cleaned up is what I was told. They also come with the stud guides.
1 set of Comp double valve springs good to .600lift brand new in box.
$100
1 set of comp titanium locks and retainers brand new in box.
$70
1 Meziere red high output electric water pump, never ran.
$100
1 set of PBM split 1.5/1.6 full roller aluminum rocker arms never ran.
$100
All prices are negotiable, like I said I just need this stuff gone because I have no place to store it. All parts are in very good condition and I will gladly ship them anywhere, if you want pictures just let me know.
Thanks-Jeremy
1 set of eagle esp forged h-beam rods, 6.25 inch
$150
1 set of fully balanced TRW forged pistons, part # L2252af-30-
$150 for set.
1 solid roller custom grind, never ran. It is a Crane #118151 260/270@.050, 300/310advertised, 108LSA, .625" lift before lash with 1.5 rockers.
$100
1 Spec stage 3 clutch disc in perfect shape w/about 1k miles on it
$40 shipped
1 set of Canfield aluminum heads http://www.canfieldheads.com/sbc_2600.html
These heads are $1000 new bare but I will take $400 for them because they had a hairline crack at the base of rocker mount from overtightening of the stud and the crack was filled but the extra material was never shaved off, it would cost about $200 to have them cleaned up is what I was told. They also come with the stud guides.
1 set of Comp double valve springs good to .600lift brand new in box.
$100
1 set of comp titanium locks and retainers brand new in box.
$70
1 Meziere red high output electric water pump, never ran.
$100
1 set of PBM split 1.5/1.6 full roller aluminum rocker arms never ran.
$100
All prices are negotiable, like I said I just need this stuff gone because I have no place to store it. All parts are in very good condition and I will gladly ship them anywhere, if you want pictures just let me know.
Thanks-Jeremy
