What gears for F1A 355
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jul 2005
Location: Utah
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
What gears for F1A 355
I'm about to order a 9 inch and was curious what gears you high power blower guys are runnin? Car is an M6 with a 26" tall tire aiming for around 700rwhp.
Looking at 3.70's or 3.89's
Looking at 3.70's or 3.89's
#2
TECH Enthusiast
iTrader: (17)
I think you would want to go with a taller gear (numerically lower) than that. I would say 3.42, 3.55 or whatevers close to that for a ford (not to sure). Also what RPM were you pushing it to? I ran 4.11 with mine and I had to push it to about 7100 in the 1/4, this is with 26" tall tires and about 620rwhp. You may want to get some 28" tires.
I plan on 3.42 shortly. good luck
I plan on 3.42 shortly. good luck