3" Aluminum doughnuts...where?
#1
3" Aluminum doughnuts...where?
Searching the "G" search page...can't find ****. Do they make aluminum doughnuts? Any sponsors carry these?
I need 2(total) 3inch doughnuts, preferably 1/8th inch thick.
I'll continue searching in the meantime, and direction pointing is appreciated....
I need 2(total) 3inch doughnuts, preferably 1/8th inch thick.
I'll continue searching in the meantime, and direction pointing is appreciated....
#7
LS1Tech Sponsor
iTrader: (2)
Here you go for the 3" aluminum donuts:
http://secure.chassisshop.com/partlist/499/
Please note: The inner seam requires finish welding after cutting.
Jim
http://secure.chassisshop.com/partlist/499/
Please note: The inner seam requires finish welding after cutting.
Jim
Trending Topics
#11
Here you go for the 3" aluminum donuts:
http://secure.chassisshop.com/partlist/499/
Please note: The inner seam requires finish welding after cutting.
Jim
http://secure.chassisshop.com/partlist/499/
Please note: The inner seam requires finish welding after cutting.
Jim
Wicked.
Thanks pimpin.
-jamie
#12
...also, just talked to racepartssolutions,...they will carry them in about a month.
Also, they have 3" V band flanges,..which, every turbo place that I called, said they have never heard of a size that large. Well, i found those, 15 bucks each. Soo,..on my way to completeing this project.
Thank you guys for your help, I appreciate it. Been kinda scatter brained over the past few weeks....as build a turbo project like this,...to me is all new.
Thanks again...peace out.
Also, they have 3" V band flanges,..which, every turbo place that I called, said they have never heard of a size that large. Well, i found those, 15 bucks each. Soo,..on my way to completeing this project.
Thank you guys for your help, I appreciate it. Been kinda scatter brained over the past few weeks....as build a turbo project like this,...to me is all new.
Thanks again...peace out.
#13
TECH Fanatic
iTrader: (2)
Join Date: Sep 2004
Location: Kalifornia
Posts: 1,138
Likes: 0
Received 0 Likes
on
0 Posts
...also, just talked to racepartssolutions,...they will carry them in about a month.
Also, they have 3" V band flanges,..which, every turbo place that I called, said they have never heard of a size that large. Well, i found those, 15 bucks each. Soo,..on my way to completeing this project.
Also, they have 3" V band flanges,..which, every turbo place that I called, said they have never heard of a size that large. Well, i found those, 15 bucks each. Soo,..on my way to completeing this project.
thats one of the most common sizes. i've never had a problem finding any size aluminum v-band flanges, a local company also makes up to 7" flanges.
#14
yeah man. Dead serious. Most places I called,..didn't even call me back. The places I called, and did spend time with....just didn't know what to tell me. They said,.."well,...we've got aluminum BOV flanges but, they're like 50mm" ....no thanks buddy.
race parts solutions hooked me up. They're local,..soo... it worked out nicely. I was about to do some industrial equipment searches if I couldn't find what I needed.
I just order 2, 3" donuts. Friggin 243.00bucks. crazy but...in the name of weight savings....worth it.