F/S - Lower control arms - Like New condition (North of boston)
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: North of Boston, MA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
F/S - Lower control arms - Like New condition (North of boston)
Hey guys. I'm selling a pair of Black J&M Performance lower control arms. They are stock length with poly/poly ends. If you read about them, they have these special bushings that helps them not bind like normal poly bushings in hard turns.
I bought these LCA's to install with some UMI relocation brackets. The relocation brackets shifted my rear end back a little bit, so I havn't been driving the car. I ordered some adjustable spohns so I can recenter the rear end in the wheel well. They are still on the car right now, but I think I may have them off tomorrow because my spohns just came! (weather permitting).
I will get pictures of them once I get them off the car.
They cost $115 new. Looking for $85, pretty firm. I would like a local sale if possible. (MA - I'm about 20 minutes north of Boston.)
Thanks
I bought these LCA's to install with some UMI relocation brackets. The relocation brackets shifted my rear end back a little bit, so I havn't been driving the car. I ordered some adjustable spohns so I can recenter the rear end in the wheel well. They are still on the car right now, but I think I may have them off tomorrow because my spohns just came! (weather permitting).
I will get pictures of them once I get them off the car.
They cost $115 new. Looking for $85, pretty firm. I would like a local sale if possible. (MA - I'm about 20 minutes north of Boston.)
Thanks