o2 wiring harness trouble
06-17-2008, 11:05 AM
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: frt lauderdale florida
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
o2 wiring harness trouble ok guys well heres the deal. i installed some LT headers and when doing this i drove around and the wiring harness for the 02 sensor got burnt through. i didnt burn the actual o2 sensor wiring but the harness it connects to. does any1 know where i can buy another harness so i can splice it back on so my o2 can read again? i really need to fix this asap. plz let me know thanx guys. kyle
06-18-2008, 07:47 PM
#2
Staging Lane
Join Date: Jan 2005
Location: Columbia S.C.
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Try the dealer, they can find them if they are willing to look. As a last resort, you can hardwire them, but use solder and heat shrink. Also, try talking to the techs in the shop, most of them will stash old wiring harness's and you can cut off the connectors you need. Keep in mind that the F-body connectors are not used by F-body's only.
