DETROIT_AREA_00_SS

iTrader: (7)

I am in the process of rebuilding a 346 5.3 iron block motor. It is going to be mated to an incon kit maxxing out the turbos at about 15psi. What rockers and lifters should I use? I was looking at Yella Terras.....opinions please.
Also, anythin else I need to know ?
Comp ration is 8.7 to 1
The heads are LS1 ARE stage 2.5 with K-motion 750 springs. I still dont have all the info on the motor but ARE did it about 2 yrs ago.

robertbartsch

I'm using Terra now; a good aftermarket part.

Phate

iTrader: (2)

One word of advice...have the ARE heads looked at before you install the motor.

Scott