APS BOV's removed
#1
APS BOV's removed
Anyone tried the APS kit with the BOV's on and then off? I was wondering if it was much louder with them off/sounded better. Use a 1 to 10 scale with the BOV's off being a 10 as far as loudness.
What did you guys use to cap the turbo intake holes?
What did you guys use to cap the turbo intake holes?
#2
TECH Enthusiast
iTrader: (2)
Join Date: May 2003
Location: Milliken, Colorado
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
People are using walker caps from ACE Hardware to cap the flange off. Others have just cut them off and welded them shut.
I bought two Turbosmart Megasonic BOV's and i plan on using the Walker Cap method.
I bought two Turbosmart Megasonic BOV's and i plan on using the Walker Cap method.
#3
TECH Fanatic
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
Forge
I used forge BOV myself and had em welded right at the neck of the APS incooler !!mine sound great and look good while doing it LOL!!Heres some pics
http://s243.photobucket.com/albums/ff160/ebarnat/APS/
http://s243.photobucket.com/albums/f.../APs%20Engine/
The top is when i first cut the holes and put the BOV in Not welded yet ((FITTED))
The secound pic is them welded and finished and painted with the intercooler i hated that flat funk finish that APS did on the intercookler !!HATED IT!! LOL!!
http://s243.photobucket.com/albums/ff160/ebarnat/APS/
http://s243.photobucket.com/albums/f.../APs%20Engine/
The top is when i first cut the holes and put the BOV in Not welded yet ((FITTED))
The secound pic is them welded and finished and painted with the intercooler i hated that flat funk finish that APS did on the intercookler !!HATED IT!! LOL!!
#4
TECH Enthusiast
iTrader: (2)
Join Date: May 2003
Location: Milliken, Colorado
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I used forge BOV myself and had em welded right at the neck of the APS incooler !!mine sound great and look good while doing it LOL!!Heres some pics
http://s243.photobucket.com/albums/ff160/ebarnat/APS/
http://s243.photobucket.com/albums/f.../APs%20Engine/
The top is when i first cut the holes and put the BOV in Not welded yet ((FITTED))
The secound pic is them welded and finished and painted with the intercooler i hated that flat funk finish that APS did on the intercookler !!HATED IT!! LOL!!
http://s243.photobucket.com/albums/ff160/ebarnat/APS/
http://s243.photobucket.com/albums/f.../APs%20Engine/
The top is when i first cut the holes and put the BOV in Not welded yet ((FITTED))
The secound pic is them welded and finished and painted with the intercooler i hated that flat funk finish that APS did on the intercookler !!HATED IT!! LOL!!