Trickflow Heads: Questions
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Jul 2008
Location: Grand Prairie, Tx
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Trickflow Heads: Questions
I have a G5x3 cam on my 07 C6 six speed and am looking at getting a set of TF heads. What would be recommended with this cam? 215 or 225? I am not wanting to swap the cam if I don't need to. I am wanting to hit very near the 500rwhp NA. If I get the TF's do I need new rockers or anything besides gaskets and bolts?
Thanks,
Andrew
Thanks,
Andrew
Last edited by cammedc6; 07-18-2008 at 07:42 AM.
#3
This post needs to be moved to the Gen. IV Internal Engine thread. I think they can help you more there. I have an LS1 so I'm not sure. However with that setup you should definitely be knocking on the 500hp door.
#5
TECH Apprentice
iTrader: (5)
Join Date: May 2003
Location: DE
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
I have a G5x3 cam on my 07 C6 six speed and am looking at getting a set of TF heads. What would be recommended with this cam? 215 or 225? I am not wanting to swap the cam if I don't need to. I am wanting to hit very near the 500rwhp NA. If I get the TF's do I need new rockers or anything besides gaskets and bolts?
Thanks,
Andrew
Thanks,
Andrew