clean 94 z28/m6 plus abunch of good stuff
08-10-2008, 11:33 PM
#1
Staging Lane
Thread Starter
Join Date: Apr 2007
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
clean 94 z28/m6 plus abunch of good stuff im in central texas area 512-576-7118,dru
94 z28
polo green hard top
clean interior with leather
dark tint
fresh rebuilt m6
new clutch
hurst shifter
bilstein shocks
poly bushings
eibach springs
hotchkis control arms
hotchkis panhard bar
bmr support
strut tower brace
brand new radiator
brand new opti spark
msd wires
slp cold air
full slp exhaust headers to tail pipes
stock aluminum heads
new beehive springs,retainers,keepers setup for lt4 cam
stock bottom end with lt4 cam(spun rod bearing)
rearend just gone through new 3:42 gears bearings etc.
rearend girdle
17x9.5 and 17x11 torque thrust II (no rash)
315/35 are new
255/45 30% left
new optima red top
new water pump
new 160 thermostat
blew cold a/c and ran real strong until the bearing spun.i shut the car off immediatly and towed her home.
motor is torn down short block is still in the car.the car is real clean paint is good,bumpers a little faded.im sure im leaving some stuff out but you get the idea.the car rides nice no rattles and never wrecked.the car is clean and so is the title.current stickers.
first $4000. FIRM goes with a bum shortblock(has the lt4 cam in it)
also have a new lt1 shortblock built by a dei tech.
new gm lt1 block with billet 4bolt main caps($?)
callies dragonslayer stealth crankshaft ($2000.)
scat 6" forged h-beam rods(cap screw style $550.)
wiseco forged pistons,floating pins($680.)
laser cut main and rod bearings
molly rings
custom ground cam(specs unknown)
new gmpp timing chain set
cam already degreed
windage tray
new opti distributor on it
brass freeze plugs
bottomend is balanced and it is completely assembled and ready for heads and intake.settup for spending alot of time in the 6-7krpm range with no problem.
im sure im leaving some info out ill edit as i remember
first $4000. FIRM gets this shortblock.
other parts include:
extra lt1 block w/caps
extra a/c parts compressors etc.
alternators x3
heads (stock aluminum)
arp head bolts
crane digital 6 box
crane gold 1.6 rockers
extra intake
2 extra water pumps
extra everything ps pumps,sensors,mounts,cams,lifters,air meters,polished v/c,fuel rails w/injectors
just a bunch of extra good parts
MAKE OFFERS ON THE EXTRAS
CASH PRICE IS FIRM ON THE CAR AND SHORTBLOCK
(this means dont offer me less than what i posted,thanks)
MIGHT DO SOME TRADING THOUGH.PM TRADE OFFERS
interested in mustang,bikes,and cash.
the motor shown is the spun rod bearing motor.
dei motor not shown,yet.
no time to play will make someone a real nice ride
http://webmail.aol.com/37668/aol/en-...wMail&partId=4
94 z28
polo green hard top
clean interior with leather
dark tint
fresh rebuilt m6
new clutch
hurst shifter
bilstein shocks
poly bushings
eibach springs
hotchkis control arms
hotchkis panhard bar
bmr support
strut tower brace
brand new radiator
brand new opti spark
msd wires
slp cold air
full slp exhaust headers to tail pipes
stock aluminum heads
new beehive springs,retainers,keepers setup for lt4 cam
stock bottom end with lt4 cam(spun rod bearing)
rearend just gone through new 3:42 gears bearings etc.
rearend girdle
17x9.5 and 17x11 torque thrust II (no rash)
315/35 are new
255/45 30% left
new optima red top
new water pump
new 160 thermostat
blew cold a/c and ran real strong until the bearing spun.i shut the car off immediatly and towed her home.
motor is torn down short block is still in the car.the car is real clean paint is good,bumpers a little faded.im sure im leaving some stuff out but you get the idea.the car rides nice no rattles and never wrecked.the car is clean and so is the title.current stickers.
first $4000. FIRM goes with a bum shortblock(has the lt4 cam in it)
also have a new lt1 shortblock built by a dei tech.
new gm lt1 block with billet 4bolt main caps($?)
callies dragonslayer stealth crankshaft ($2000.)
scat 6" forged h-beam rods(cap screw style $550.)
wiseco forged pistons,floating pins($680.)
laser cut main and rod bearings
molly rings
custom ground cam(specs unknown)
new gmpp timing chain set
cam already degreed
windage tray
new opti distributor on it
brass freeze plugs
bottomend is balanced and it is completely assembled and ready for heads and intake.settup for spending alot of time in the 6-7krpm range with no problem.
im sure im leaving some info out ill edit as i remember
first $4000. FIRM gets this shortblock.
other parts include:
extra lt1 block w/caps
extra a/c parts compressors etc.
alternators x3
heads (stock aluminum)
arp head bolts
crane digital 6 box
crane gold 1.6 rockers
extra intake
2 extra water pumps
extra everything ps pumps,sensors,mounts,cams,lifters,air meters,polished v/c,fuel rails w/injectors
just a bunch of extra good parts
MAKE OFFERS ON THE EXTRAS
CASH PRICE IS FIRM ON THE CAR AND SHORTBLOCK
(this means dont offer me less than what i posted,thanks)
MIGHT DO SOME TRADING THOUGH.PM TRADE OFFERS
interested in mustang,bikes,and cash.
the motor shown is the spun rod bearing motor.
dei motor not shown,yet.
no time to play will make someone a real nice ride
http://webmail.aol.com/37668/aol/en-...wMail&partId=4
