HPTuner file for a cammed car?
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: Wichita, KS
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
HPTuner file for a cammed car?
I just ordered an MS3 cam and I am wondering if anyone has an HPTuners file that I might use as a starting point. I will be plugging my wideband in to tune it properly myself but I'm slow so it could be weeks before I get around to it. I'd prefer a file off something that has been dyno tuned or tuned with a wideband. I don't care if its auto or manual or what gears because I won't load the file direct, but instead mod the fueling parameters in my tune to match. Even a similar cam would get me close, doesnt have to be an MS3 but something around 240ish duration, 600ish lift, and 113 LSA. Thanks in advance!
BTW I have checked over the repository and am not finding much.
BTW I have checked over the repository and am not finding much.
#3
I have z28poweredlt1's tune. He has an MS3 with TSP LS6 heads on a 1998 M6. It was dyno tuned to 460rwhp and the idle is dialy driveable. I will post it up tonight for you.