Mount flipping
#2
TECH Enthusiast
Join Date: Jul 2010
Location: louisiana
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
should search for it, there is a write up somewhere
its the top one
when you open the hood you will see the black brace connecting the frame of the car to a dogbone that then connects to the aluminum bracket that is connected to the engine.
-inside the black brace connecting to the car is the square motor mount. flip it. now instead of the engine moving by itself it will move more with the car. you can notice the diffrence and its a free mod. i like it. and there are no cons
its the top one
when you open the hood you will see the black brace connecting the frame of the car to a dogbone that then connects to the aluminum bracket that is connected to the engine.
-inside the black brace connecting to the car is the square motor mount. flip it. now instead of the engine moving by itself it will move more with the car. you can notice the diffrence and its a free mod. i like it. and there are no cons
#4
TECH Enthusiast
Join Date: Jul 2010
Location: louisiana
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
detach the dogbone from the square mount.
leave the axle inside the mount and put the bolts on each side of it back on the axle and tighten them really tight. spray tons of wd-40 all over the mount so it will slide over. then get a wrench on both sides and push or pull till it flips
leave the axle inside the mount and put the bolts on each side of it back on the axle and tighten them really tight. spray tons of wd-40 all over the mount so it will slide over. then get a wrench on both sides and push or pull till it flips
#5
TECH Junkie
iTrader: (1)
Join Date: Jun 2007
Location: New Orleans La
Posts: 3,159
Likes: 0
Received 0 Likes
on
0 Posts
Dont flip it replace it. Thats the best thing to do.
http://www.3800performance.com/Merch...ct_Code=MSP-MM
http://www.3800performance.com/Merch...ct_Code=MSP-MM
#7
Teching In
Thread Starter
Join Date: Oct 2011
Location: Conroe< Tx...bout 35 miles nort of Houston
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Right I'm waiting on a buddy to buy the 2 pack of mounts but in the mean time imma flip it. Now when I replace it I'm guessing I'm going to cut the old one out, how hard is putting the new one in?