LM97Z

iTrader: (4)

How hard is it to change out the window motors on a 96 Z28??

caldercay

I've done the driver's side with no issues - fairly easy. I now have to do
the passenger side (it stops about 1/2" from fully closing - I have to
wait till the circuit breaker cools, then it closes fully). Anyway:

http://shbox.com/page/windowmotor.html

Mikey 97Z M6

iTrader: (37)

It's not too bad actually. Pulling the door panel off is prolly harder than anything else. You'll need to drill out the stock rivets that secure it to the door (if it hasn't been replaced prior). It's about an hour long job.

Mike

xx_ED_xx

iTrader: (17)

I need to hire one of you guys to do mine. I f**cking hate doing window motors and regulators in 4th gens. I think most of it is because of my long *** arms

LivFastLs1

anybody have any links on instructions on how to change out a window regulator on both doors?

they roll up but leave about a 2 inch gap in the front corners.. i need help wit this before it starts to rain haha

94Aquaformula

iTrader: (28)

look up ^^^^ there is a link. Very easy job. Common since

letsrun97z

iTrader: (7)

not hard at all i just felt where the rivets were and drilled right threw took maybe 1.5hr to do was real simple

LivFastLs1

ohh okay i was just wondering because i had takin it to a shop and to pontiac and they both said it would be about 800 a door.. most of the price is just labor at 100 per hour!! ill chek out the link tho

djjab57

iTrader: (17)

I called my paint shop and they told me $50 a door, so guess where ill be taking mine ?

LivFastLs1

haha nice... guess imma hav to look around and chek other prices