Motor mounts question...
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: PSL, FL
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Motor mounts question...
If I have issues with headers still hitting on the K-frame after doing some grinding and replacing the motor mounts, can the mounts be spaced up like 1/4" off the k-frame without causing too much issue? Basically, I haven't replaced the mounts yet and my headers are on the k-frame after clearancing still. I can't get back in there to grind anymore, and it isn't on the frame that hard...1/4" would be enough now without even changing the mounts...assuming mine are sagging. Which is why I ask. If the mounts are not sagging and the new ones don't lift the motor enough to clear, can I space the mounts off the frame some?
#2
TECH Senior Member
iTrader: (36)
If I have issues with headers still hitting on the K-frame after doing some grinding and replacing the motor mounts, can the mounts be spaced up like 1/4" off the k-frame without causing too much issue? Basically, I haven't replaced the mounts yet and my headers are on the k-frame after clearancing still. I can't get back in there to grind anymore, and it isn't on the frame that hard...1/4" would be enough now without even changing the mounts...assuming mine are sagging. Which is why I ask. If the mounts are not sagging and the new ones don't lift the motor enough to clear, can I space the mounts off the frame some?
#4
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: PSL, FL
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Any preference on what brand of poly? Energy, or one of the other brands in sumitt or jegs? Does it matter or is poly poly? Fitment differences?
#5
TECH Senior Member
iTrader: (36)
Yea, they aren't really "banging" so much as barely touching still...I was just wanting to make sure mounts alone would do the trick and if not see if spacing was an option. Hopefully just the mounts will be enough. And I was planning on poly anyway.
Any preference on what brand of poly? Energy, or one of the other brands in sumitt or jegs? Does it matter or is poly poly? Fitment differences?
Any preference on what brand of poly? Energy, or one of the other brands in sumitt or jegs? Does it matter or is poly poly? Fitment differences?
#6
12 Second Club
iTrader: (1)
Join Date: Mar 2008
Location: North Phoenix, AZ
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Yea, they aren't really "banging" so much as barely touching still...I was just wanting to make sure mounts alone would do the trick and if not see if spacing was an option. Hopefully just the mounts will be enough. And I was planning on poly anyway.
Any preference on what brand of poly? Energy, or one of the other brands in sumitt or jegs? Does it matter or is poly poly? Fitment differences?
Any preference on what brand of poly? Energy, or one of the other brands in sumitt or jegs? Does it matter or is poly poly? Fitment differences?
Brand shouldnt matter too much really. just price differences of a couple dollars.
And yes they should lift it up enough to clear the k-member, infact i had my exhuast welded up before i did my motor mounts and it ended up lifting the exhaust so much that it hit on the driver side bump so they had to bend the hanger and pull the tube down some more.