Masochist

iTrader: (1)

Do people still have issues getting these to seal? Using Felpro gaskets I have had 0 luck getting mine sealed atop LE2 heads..

Any thoughts or tips are welcome and needed...

This has been such a pain that I would also be open to any alternative vc options that would clear my Comp 1.6:1 RR's.

Blackbirdws6

iTrader: (7)

When I had Cantons, I used cork gaskets with no issues.

BIGsmokey10

iTrader: (3)

Same here. Cork gasket and no issue

Dirty_Bird

Extra thick perimeter cork trimmed and hitacked to valve cover = no leaks

Masochist

iTrader: (1)

Anybody have some insight as to where I can find these type of gaskets?

Dirty_Bird

Pepboys speed shop, summit, jegs, etc. Im sure any autoparts store will, ask for a sbc cork valve cover gasket

Gojira94

iTrader: (4)

I'm using stock GM gaskets, no leaks with my Cantons but they were a pain to seat properly. Nothing Fel-Pro makes that I could find would fit properly so I reused my stock ones, which were still in good shape.

Definitely would/ will go with cork next time.

BoostedDSM

iTrader: (6)

Fel Pro 1648 Mine leak atm, but i wrested them in and probably caused it myself. New gaskets on order, most places around me are 50 plus, summit is 35.

lt1-xjs

Comp 1.6 should fit under the stock cover. I run the Proform 141-131 myself, they make covers for the GM performance line. There are several available now.https://www.proformparts.com/categor...k_Valve_Covers