Advice on procharger build.
04-07-2016, 06:23 PM
#41
Teching In
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Rochester
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Id be surprised if my setup made 12psi and I am selling my old procharger single intercooled kit. Its just the intercooler surge valve and some piping.
04-08-2016, 06:28 AM
#42
You have a P-1SC and you were making 8 psi with a 4.25 pulley? Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
07-23-2016, 03:13 PM
#44
Teching In
Thread Starter
iTrader: (5)
Join Date: Feb 2012
Location: Rochester
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
So after all the bull **** with J&J Speedshop I ended up not using meth injection or MS3 pro and re tuning at Kennedys Dynotune (also in buffalo NY) with the front mount intercooler setup from cx racing and a 4.00" pulley, 60 lb injectors. Car made 506whp and 498 ft lbs on only 6lbs of boost 93 octane. Pretty happy with it as it sits although I do plan on goin smaller on the pulley to reach 8psi. Made it out to the track the other night for the first time all year, car went 11.75 and 118mph. Going to be putting plugs and wires in it soon as well..
What wires work well ive heard good things about the Taylor wires. Plan on gapping the plugs at .030, TR6s if i remember correctly?
What wires work well ive heard good things about the Taylor wires. Plan on gapping the plugs at .030, TR6s if i remember correctly?