LT1: What size wrench do I need for the inlet and outlet hoses on steering rack?
09-17-2016, 08:00 AM
#1
TECH Enthusiast
Thread Starter
Join Date: Apr 2011
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
LT1: What size wrench do I need for the inlet and outlet hoses on steering rack? I can't find the darn wrench in my tool box 
I tried Google and the 2000+ page manual I have in my possession for my car and cannot find it. I could only find the torque tightening specs but nothing regarding wrench size needed to remove the outlet/inlet hoses on the steering rack. Thanks
I tried Google and the 2000+ page manual I have in my possession for my car and cannot find it. I could only find the torque tightening specs but nothing regarding wrench size needed to remove the outlet/inlet hoses on the steering rack. Thanks 
09-17-2016, 10:56 AM
#2
TECH Enthusiast
Thread Starter
Join Date: Apr 2011
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Found For anyone wondering now, the outlet and inlet hose uses an 18mm wrench. I could not find a single wrench at Harbor Freight tools so I just went to my local hardware store and picked one up for 2.99.
Note: It's an 18mm wrench on both. Do not even try an SAE sized one, you'll **** up the nut/head.
Note: It's an 18mm wrench on both. Do not even try an SAE sized one, you'll **** up the nut/head.
