valvetrain questions
#1
On The Tree
Thread Starter
iTrader: (8)
Join Date: Jan 2005
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
valvetrain questions
just wondering if it would cuase any problem to take the guideplates off my AFR heads and run slef aligning rockers with stock pushrods? i've got the rockers and pushrods from my last setup (10k miles old) and would prefer to not have to buy a new set of either. just trying to get your opinions.
-jeff
-jeff
#3
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
What's the rest of your setup? I wouldn't run SA rockers for any kind of serious hp or high revs. Two little tabs aren't nearly enough for me to trust over a nice guideplate.
P.S. I think the guideplates on the AFR's are welded on. You should just get rid of them and run your other setup. Send them to me and I'll get you some nice ported stock castings.
P.S. I think the guideplates on the AFR's are welded on. You should just get rid of them and run your other setup. Send them to me and I'll get you some nice ported stock castings.