Skidd

iTrader: (2)

What is the largest cam you can use with the stock valve springs? also looking for a carb intade for a lt1 also.

Armyman2445

iTrader: (17)

Stock springs are pretty much good for stock cams. But Ive have known people to run a cc305 on stock springs with stock 1.5 rocker arms.

NAL-24502592 is the part number on Summit.

vanilla89

iTrader: (8)

I would NOT run stock springs with a larger than stock cam.

Do it wright or don't do it at all,or you'll be building a new motor...

Skidd

iTrader: (2)

What springs ect. do you recomend.

vanilla89

iTrader: (8)

eather some COMP 918's or some CRANE CAMS #10308

96capricemgr

iTrader: (1)

He is looking for a carbed intake so pretty much no chance he will be doing it right.

If you want a carbed smallblock go gen 1, all you will accomplish by carbing an LT1 is severely limiting your head and intake choices to no real benifit. The injection is a big part of what makes the LT1 what it is.

Skidd

iTrader: (2)

Just caught the post, this is going into a s10 for a swap, I picked up the good long block off a friend for a good price so.