Anyone know of a tuner for a 2 bar tune on a 92 vette?
#1
Anyone know of a tuner for a 2 bar tune on a 92 vette?
Hi guys. I posted this in the corvette forum with not too much in the way of results. Currently I've been tuning based on rpm and adding p/e for the fuel. However, my boost fluctates from 2nd to 3rd gear from 14 psi to 10 psi. If I don't lean it out in 3rd, it's runs super rich. Anyone know of anyone that could do a two bar tune on this car. Me and my buddy have been burning chips but neither of us has done a 2 bar map tune yet. BTW, we're in California. Even just guidance would work. or maybe a sample file.
#2
TECH Senior Member
iTrader: (3)
Join Date: Oct 2006
Location: Decatur, TN (N-W of Athens)
Posts: 7,564
Likes: 0
Received 4 Likes
on
4 Posts
The only help I can provide is this site.
ftp://ftp.diy-efi.org/pub/gmecm/
It's kind of hard to navigate and read what things are, but I'm sure you'll get the hang of it. Most things are sorted as such: By ECM model, By Chip model. The folders are the ECMs and the .bin are the Chip (I'm sure you knew that part though).
Good luck.
ftp://ftp.diy-efi.org/pub/gmecm/
It's kind of hard to navigate and read what things are, but I'm sure you'll get the hang of it. Most things are sorted as such: By ECM model, By Chip model. The folders are the ECMs and the .bin are the Chip (I'm sure you knew that part though).
Good luck.
#3
On The Tree
Join Date: May 2005
Location: Catawissa PA
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Contact Alvin @ PCMForLess
http://www.speeddensity.org/forumdisplay.php?f=16
He did my tune and I can't be happier! If fact, i tried a couple other tuners first and none of them could get it right! Alvin did the tune mail order too!
http://www.speeddensity.org/forumdisplay.php?f=16
He did my tune and I can't be happier! If fact, i tried a couple other tuners first and none of them could get it right! Alvin did the tune mail order too!