the_merv

iTrader: (88)

This is a little project I did for a friend of mine..


Here is what we started with..



Started to tear into it..



LS7 Clutch Kit



Stock LS1 F-Body T56



Yes I used a Ratchet Strap to install it..



Installed with the factory Manual Cross Member and Poly Mount..



Here is the Interior..still have some finishing touches to do.

I cut the Pedal and put on a stock Cover, installed a Manual Steering Column Cover after I removed the Shifter, and did a little bit of wiring. The Shifter is a B&M Ripper with a little bit of an extention.




Not too bad for a few days of work, we still have a couple of bugs to work out, it drives very well.

Next is the 6.0l..

Gen414

iTrader: (38)

Nice Merv....when you coming over to do my '55 Pontiac??

the_merv

iTrader: (88)

.. When I know there is guaranteed Beer and Funding..