please help cars apart...
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Dallas
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
please help cars apart...
trying to install this bitch of a mastery cylinder. ticks adjustable. how the **** do you get the tick master cylinder in there. the steering rack is in the way and the brake master cylinder is in the way. i dont see how it could possibly fit in there. how do you go about putting it in? im about to blow my car up i cannot for the life of my get this ****** in there. so much **** is in the damn way. plz someone explain i have to drive this bitch to work tomorrow...
ive tried all ways think able. plz someone who has installed theirs, plz give me some kind of advice im about to blow up...
ive tried all ways think able. plz someone who has installed theirs, plz give me some kind of advice im about to blow up...
#2
TECH Addict
iTrader: (15)
Join Date: Sep 2005
Location: San Antonio, TX
Posts: 2,062
Likes: 0
Received 0 Likes
on
0 Posts
Only have to look about 5 threads down and you would find the answer https://ls1tech.com/forums/manual-tr...der-video.html
#6
Launching!
iTrader: (21)
Join Date: Apr 2006
Location: Parma, Oh
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I put mine in solo without removing anything. Go from the top. You do need to move the big wiring harness up a little.. at least I did. I also loosened the line coming off the master until I got it bolted up. Then adjusted and tightened it. Its a PITA to get the bolts lined up. Took me a couple hours by myself. Cut my hands up pretty bad too.