getting the transmission flush with belhousing.
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: Oklahoma
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
getting the transmission flush with belhousing.
hey everyone a few weeks ago i had to remove my tranny in my 99 m6. when reinstalling it, me and a friend had the hardest time getting the transmission to get flush with the belhousing. It would get to about a inch then the spring on the slave i believe would be keeping it from going any further. Well i am having to remove the tranny again, this time when i reinstall it if i get someone to press the clutch will it realive that pressure? thank you
#3
https://ls1tech.com/forums/manual-tr...uested-30.html
open this link and read post 584 (tip number 2)
open this link and read post 584 (tip number 2)