Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

GMM RipShifter

Thread Tools
 
Search this Thread
 
Old 12-07-2010, 11:25 PM
  #1  
Teching In
Thread Starter
 
dmears's Avatar
 
Join Date: Sep 2009
Location: San Diego, Ca
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default GMM RipShifter

Has anyone had a problem with this shifter? I installed the race shifter and am now having problems with the trans. According to the local GMC dealer the shifter adjustment lock nuts gradually backed off and did not allow the shifter to move the gears into full alignment. This, according to the dealer, wore away the teeth on 2d and 6th gear, not allowing full engagement and causing me to have the trans, 2d and 6th, rebuilt.

According to JHP, they have never had this problem and I want to know if anyone has had or heard of this problem?>

Please email direct: dmears2002@yahoo.com or call me on my cell: 858 386 6332. I would like to have as much ammunition when I go back to pick up the car.

Don Mears



Quick Reply: GMM RipShifter



All times are GMT -5. The time now is 04:14 PM.