Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Anyone ever ran this Master Cylinder??? Input Please!!!!

Thread Tools
 
Search this Thread
 
Old 12-18-2011, 09:50 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
Turbodude06's Avatar
 
Join Date: Nov 2011
Location: North, Ga
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default Anyone ever ran this Master Cylinder??? Input Please!!!!

Well I just did the drill mod today cause I've been having problems with the clutch disengaging and loosing pressure over time, and now it won't bleed out at all(Bleed for about an hour with no improvement) so I figured something took a dump lol... But anyways I'm looking to replace the master cylinder first and I like the Tick adj. one but $300 is a little much. But I did find this on the JEGS site made by RAM... http://www.jegs.com/i/Ram-Clutches/7...oductId=859334 Anyone have any input on this?? I wouldn't mind spending that much for a good product.
Old 12-18-2011, 09:58 PM
  #2  
10 Second Club
iTrader: (9)
 
82cetuner's Avatar
 
Join Date: Sep 2009
Location: Denham Springs, LA
Posts: 1,368
Likes: 0
Received 7 Likes on 7 Posts

Default

I would do the Tick if I were you I belive they are having a sale right now and id pick up the remote bleeder as well
Old 12-18-2011, 10:02 PM
  #3  
Teching In
Thread Starter
iTrader: (1)
 
Turbodude06's Avatar
 
Join Date: Nov 2011
Location: North, Ga
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

Yea I plan on doing the remote bleeder too, that bleeding traditionally sucks on these cars lol...



Quick Reply: Anyone ever ran this Master Cylinder??? Input Please!!!!



All times are GMT -5. The time now is 08:32 AM.