Tranny issue, will not go into 2nd and 3rd
05-10-2012, 11:17 AM
#1
Teching In
Thread Starter
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Tranny issue, will not go into 2nd and 3rd Hello gang, I've been lurking for a while and what a great place. I'm currently finishing off on LS1 project. I have a small issue with the T56. The funny thing was the car was fine a month ago before it sat to have some body work completed. Here are the symptoms.
Engine off: All gears engage fine. The MGW shifter goes into all 6 gears and reverse no problem.
Engine ON, Car NOT moving: Press in the clutch and all gears except 2nd and 3rd will not go in. It feels like something is locking it from going in.
Note: I can start in 2nd and 3rd fine, shifts out of 2nd and 3rd fine, as soon as the shifter sees neutral, it will not go back in to 2nd or 3rd.
Engin ON and car moving: Everything is fine. As soon as the car starts to move, shifter enters all gears no problem.
I thought it was bleeding. I bled the slave and the Master for like a hour and no bubbles.
Any thoughts?
Engine off: All gears engage fine. The MGW shifter goes into all 6 gears and reverse no problem.
Engine ON, Car NOT moving: Press in the clutch and all gears except 2nd and 3rd will not go in. It feels like something is locking it from going in.
Note: I can start in 2nd and 3rd fine, shifts out of 2nd and 3rd fine, as soon as the shifter sees neutral, it will not go back in to 2nd or 3rd.
Engin ON and car moving: Everything is fine. As soon as the car starts to move, shifter enters all gears no problem.
I thought it was bleeding. I bled the slave and the Master for like a hour and no bubbles.
Any thoughts?
