T56 jolting
#1
Teching In
Thread Starter
Join Date: Sep 2013
Location: Abilene Tx
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
T56 jolting
I have a 98 ss with a t56, and I just had the ls7 clutch kit put it about 2 weeks ago. and I've noticed under hard shifts it chatters (like when you have wheel hop) but it doesn't make any sense cause it will do at all the way through 5th it starts more violent but going into 4 or 5th it's not as bad.
#3
Teching In
Thread Starter
Join Date: Sep 2013
Location: Abilene Tx
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#4
TECH Fanatic
iTrader: (6)
Join Date: Oct 2002
Location: Charlotte metro area
Posts: 1,967
Likes: 0
Received 4 Likes
on
4 Posts
That should be enough break in. If it has been just recently you've had the probs, I would check the hydraulics and do a vac bleed. Has the line been drilled out? This could cause a slower apply.
#5
Teching In
Thread Starter
Join Date: Sep 2013
Location: Abilene Tx
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
The master and slave were replaced along with the clutch it's going to need bleeding already?