Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

New t56 mag installed/ clank sound need help

Thread Tools
 
Search this Thread
 
Old 04-21-2014, 06:31 PM
  #1  
TECH Regular
Thread Starter
iTrader: (4)
 
lbm13186's Avatar
 
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes on 0 Posts
Default New t56 mag installed/ clank sound need help

So i messed up my old t56 so i went out and got a t56 mag from rpm transmission. installed it and everything seem alright, started the car up and moved it forward and when i did it started moving fine and then i heard a clank... so i moved it back and heard the same clank.

lifted up the rear end to see if anything was wrong and didnt see anything, so i put it in gear w/ wheels off ground and made same sound... i used royal purple synthetic as specified by rpm and used four quarts

if anyone has a suggestion please let me know

thanks guys
Old 04-21-2014, 09:09 PM
  #2  
Teching In
 
!!!FAST!!!'s Avatar
 
Join Date: Nov 2008
Location: San Diego, Ca. For now!
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

Did you check your U joints?
Old 04-21-2014, 09:14 PM
  #3  
TECH Regular
Thread Starter
iTrader: (4)
 
lbm13186's Avatar
 
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes on 0 Posts
Default

actually had to replace the ujoint because i replaced the yoke to a 31 spline and had a machine shop do it... but that could be it maybe, will def check it tomorrow



Quick Reply: New t56 mag installed/ clank sound need help



All times are GMT -5. The time now is 07:01 PM.