Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

is my clutch going or what??

Thread Tools
 
Search this Thread
 
Old 08-08-2005, 10:17 AM
  #1  
Launching!
Thread Starter
 
slpss9723's Avatar
 
Join Date: Apr 2005
Location: Abilene, TX
Posts: 263
Likes: 0
Received 0 Likes on 0 Posts

Default is my clutch going or what??

The pedal has stuck to the floor a couple more times.....once when just tried to mildly rev up and take off wasn't even over 2000 rpm.....the car has never been drag raced, just driven hard semi frequently has a little under 18K on the clock and 340hp/360 tq......haven't really noticed it slipping, just doesn't feel quite the same any thoughts?? is it possible that my new custom y-pipe could be too close to the clutch lines and getting them hot to where i'm having this problem now?? because it has only been recently that it's been happening and i just got that y-pipe done.......

Last edited by slpss9723; 08-08-2005 at 10:54 AM.
Old 08-08-2005, 12:26 PM
  #2  
TECH Regular
iTrader: (1)
 
CATCH ME's Avatar
 
Join Date: Dec 2004
Location: Philly
Posts: 479
Likes: 0
Received 0 Likes on 0 Posts

Default

sounds like a hydrolics problem. have you done any work to it? u already have an 02 so its not lilke you needed to upgrade.
Old 08-08-2005, 03:43 PM
  #3  
Launching!
Thread Starter
 
slpss9723's Avatar
 
Join Date: Apr 2005
Location: Abilene, TX
Posts: 263
Likes: 0
Received 0 Likes on 0 Posts

Default

no i haven't done any work to the tranny or clutch other than the poly tranny mount.....the funny thing is the day i installed that was the first time it happened....there's nothing that could've happened from that so probably just coincedence......
Old 08-08-2005, 10:48 PM
  #4  
Teching In
 
Transam64's Avatar
 
Join Date: May 2005
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

Slave!!
Old 08-09-2005, 01:24 AM
  #5  
Launching!
Thread Starter
 
slpss9723's Avatar
 
Join Date: Apr 2005
Location: Abilene, TX
Posts: 263
Likes: 0
Received 0 Likes on 0 Posts

Default

yeah there seems to be a lot of threads about this today.....



Quick Reply: is my clutch going or what??



All times are GMT -5. The time now is 12:56 PM.