A4 to M6 conversion for LS1 F-bod...
#1
On The Tree
Thread Starter
Join Date: May 2002
Location: Randolph, Ma
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
A4 to M6 conversion for LS1 F-bod...
I'm sure this topic has been beaten to death, but I searched and didn't come up with anything helpful, so anyways here is my question. I'm thinking of doing an M6 conversion to my '02 WS6. I know it would be easier and cheaper to find someone willing to make a swap of their M6 for my A4, but if I can't find anyone willing, what would I need, how hard of a conversion is it, and how much would it cost labor included? Also, is there any drawbacks in doing an M6 conversion? Any helpful suggestions would be appreciated.
#5
On The Tree
Thread Starter
Join Date: May 2002
Location: Randolph, Ma
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DanZ28
If you look directly in the top of this forum, you will see a sticky on the topic, should be all the info you need. Surprised a search didn't come up with it...
Dan
Dan