Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

installing a shifter

Thread Tools
 
Search this Thread
 
Old 09-28-2005, 07:58 PM
  #1  
Teching In
Thread Starter
iTrader: (3)
 
Phillymu's Avatar
 
Join Date: Sep 2005
Location: WInfield,MO
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts

Default installing a shifter

hi guys this is my first time posting here, but i browse the site quite often. im installing a pro 50 in my 99 TA. im putting it back together and i noticed that there are 3 wire connectors. one for cig lighter, 1 for aux power plug (one lightbulb) abd another connector and i cant figure out where it goes, (i dont even remember unplugging it, but someone was also talking to me during this time. installU only shows 2 plugs. where does this third one go???

Thanks
Phil
Old 09-28-2005, 08:10 PM
  #2  
TECH Enthusiast
 
mcflyz28's Avatar
 
Join Date: Nov 2001
Location: Wilmington, DE
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

possibly the light in the console, can't remember for sure
Old 09-28-2005, 08:20 PM
  #3  
TECH Addict
iTrader: (2)
 
2K2WS6TA's Avatar
 
Join Date: Nov 2002
Location: Ark City KS
Posts: 2,938
Likes: 0
Received 1 Like on 1 Post
Default

Might be the wires for the TCS, the car has the harness even if you don't have the switch, or could be the ashtray light, if it's a large square plug, then it's TCS, if it's just one wire then it's the ashtray light
Old 09-28-2005, 08:48 PM
  #4  
Teching In
Thread Starter
iTrader: (3)
 
Phillymu's Avatar
 
Join Date: Sep 2005
Location: WInfield,MO
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts

Default

TCS i never thought of that. thanks alot. i knew i only urnplugged 2 connectors
Old 09-28-2005, 09:58 PM
  #5  
Teching In
Thread Starter
iTrader: (3)
 
Phillymu's Avatar
 
Join Date: Sep 2005
Location: WInfield,MO
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts

Default

install done ..................WOW!!!!!!!!!




All times are GMT -5. The time now is 11:46 AM.