Textralia ordered need install guide
01-04-2006, 11:32 PM
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
Textralia ordered need install guide Like is aid i ordered the new textralia its gonna be on its way, need write ups or pictures of install if anybody has them. Tools, helpful objects and hints
If i'm not mistaking the clutch comes with a new Pilot Bearing how do you do this?
Thanks fellas i greatly appreciate it
If i'm not mistaking the clutch comes with a new Pilot Bearing how do you do this?
Thanks fellas i greatly appreciate it
01-05-2006, 05:31 PM
#4
11 Second Club
iTrader: (11)
Join Date: Sep 2004
Location: Cincy, Oh.
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
As far as the pilot bearing goes, rent a blind hole puller from autozone (or local parts store) and make sure it comes with all the attachments. There will be a smaller one for the pilot bearing. If the guys at the store play dumb, just keep telling them they have it. With this tool it took me 3 pulls and my pilot bearing was out. DO NOT attempt to fill the hole with grease and hammer it out with a dowel like many people will suggest. You can possibly damage your crank with that method.
I couldn't afford a textralia so I can't help you there but I imagine it's not too much different than any other clutch install.
I couldn't afford a textralia so I can't help you there but I imagine it's not too much different than any other clutch install.