W8N2SQZ

iTrader: (6)

Okay, this might be in the wrong forum, but my buddy just bought a used 03 Z05 with 18k miles and the clutch pedal sticks to the floor.

I have a 6 speed camaro and it used to do this and I bought an aftermarket clutch and master. Will my friend have to do this as well?

Can any of you Z06 guys shed a little light on the subject?

I will post this in the trans section as well

Thanks,
Glenn

Caged_Animal

Mine did that right before it went out… He should get a new one. I’d recommend an LS7 clutch if there’s not too much done to his car. Another LS6 clutch is gonna do the same thing after a few good power shifts, and most of the heavy duty clutches feel funky on near stock cars. That’s my advice…

z28drag

iTrader: (19)

probaly need to bleed the clutch, if does not work mslave is bad. take the tranny out and inspect.

W8N2SQZ

iTrader: (6)

Cool, thanks for the info guys.

Glenn